Home
About
Products
News
Contact us
English
Español
中文简体
عربي
News Center
Industry News
Company News
What is a non-stick coating?
2023-12-08
The front side of a non-stick cookware reflects the property of "non-stick", but what is behind the non-stick material? Contrary to the front, it is "sticky". Imagine if the "non-stick" material in a non-stick pan had the same "non-stick" properties as the front side of the pan to metal materials such as aluminum, non-stick pans would not be made.
Stainless steel/steel metal composite tube sheet
Stainless steel / steel composite plate is a carbon steel as a substrate, single-sided or double-sided overall cladding of stainless steel, the formation of two or more metals, energy efficient composite materials, which can give full play to the advantages of the characteristics of the two metal materials, both stainless steel, corrosion resistance, abrasion resistance,
What are the advantages of a triple-layer steel cooker?
Stainless steel than general steel (carbon steel) has a better resistance to corrosion zhi etching and heat resistance. Under the action of corrosive media, ordinary carbon steel surface will soon generate a loose layer of iron oxide, which is often referred to as rust, it can not prevent the metal and media isolation, the outside world of oxygen atoms will continue to diffuse inward, resulting in the steel continue to rust, corrosion, resulting in total destruction.
What is the best material for non-stick pan material
First, which materials are good for non-stick pans? Before you buy, you should find out what you need a nonstick pan for (such as frying, boiling, stir-frying). Depending on the main use, choose a different nonstick pan. For frying, deep-frying and stir-frying as usual, it's best to choose a non-stick pan without coating, so that when you use a spatula to cook vegetables, the coating won't fall off easily.
Main features of stainless steel clad plate welding
The stainless steel clad plate is a bimetal made of multiple layers (stainless steel) and a base layer (carbon steel, low-alloy steel, etc.). The corrosion resistance is ensured by the multiple layers, and the strength is mainly obtained from the base layer, which can save a lot of stainless steel. Has good economic value. Due to its good comprehensive performance and price advantages, stainless steel composite panels have been increasingly used in the petrochemical and food industries. Stainless steel clad plate welding is not only different from stainless steel, but also different from carbon steel or low-alloy steel, but has its characteristics and difficulties.
Corrosion inhibitor for metal composite board has good corrosion inhibition performance
For corrosion inhibitors in petroleum refining systems, metal composite panels must pass a series of tests before their usability can be determined. The test items include film-forming ability, surface activity, surface solubility, thermal stability, corrosion resistance, and moisture. Ten thousand index, continuous flow device test, etc.
The welding characteristics of stainless steel clad plate